2 Adjust the center of gravity position of the tilting axis forward and backward: With the camera in the
upright position with the lens pointing forward and the hand arm maintaining a level state as shown
in gure , let go and observe the state of rotation. Loosen the screw on the bottom of the clamping
plate and adjust the balance by sliding the quick-release clamp up and down(Refer to gure ).
* After adjustment, be sure to tighten the lock screw.
Camera forward
Camera backward
Balanced
Slide the
quick-release
clamp up to adjust
Slide the
quick-release
clamp down to adjust
15
Clamp block thumb screw
T
L
Clamp block thumb screw
T
L