Feiyu MiNi 2D Firmware Upgrade Manual Download Page 2

Page: 2 / 4

Guilin Feiyu Electronic Technology Co., Ltd.

Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]

- 2 -

3. Open the software

——“

UPDATE FOR 2AXIS GIMBAL

”。

4. Software interface is shown in following picture.

：

5. Choose the correct port number and the correct baud rate-115200, then

click OPEN button to open the com port.(The serial port number should be

the same as the port number which checked in step 2, for example COM4).

6. The Micro-USB terminal connect to the function interface(Micro-USB

interface) on the gimbal,

power on the gimbal

. After connect successful,

the software will reminder the connection status and read out the current

version (For example

“LINK OK! VERSION 2.14”),

Summary of Contents for MiNi 2D

Page 1: ...on of the gimbal please execute step 3 6 Please refer to the following connection diagram connect the USB cable to the USB connecter before upgrading Connection Diagram 1 Download the USB driver from...

Page 2: ...ct port number and the correct baud rate 115200 then click OPEN button to open the com port The serial port number should be the same as the port number which checked in step 2 for example COM4 6 The...

Page 3: ...iyu Electronic Technology Co Ltd http www feiyu tech com service feiyu tech com 3 7 Click on OPEN FILE button and choose the correct firmware for the gimbal 8 Click on UPDATE button to start upgrading...

Page 4: ...h com 4 9 Data of firmware being sent to the gimbal completely please click Confirm button to finish the upgrade Close the software then remove the USB cable The gimbal can be used normally END Note W...