Guilin Feiyu Electronics Co., Ltd.
Page | 5
Step 4 : Test The Motor Rotation
1.
After installing the FC, activate the quad and carefully check that the propeller
rotation is as shown above.
2.
If any of the motors are rotating in the opposite direction to what is noted above,
change any two wires of the ESC 3 wire motor plug. This will correct the propeller
rotation.
3.
Lastly install the top fuselage plate to protect the FC and RC Receiver.
Step 5: Voltage Level Indication via Fuselage LED Flashing
1.
When flying, the white LED on the bottom plate will begin flashing to indicate the
voltage of your flight battery, as follows:
Battery Voltage
>11.5V
11.1V~11.5V
10.8V~11.1V
<10.8V
LED Flash
SOLID
Slow flash
Medium flash
Fast flash
Indication
Enough power
Voltage down
Land now
Emergency
Landing
END of Y6 MANUAL
2
3
6
5
1
Front
4
Y6 SCORPION FLYER
1 (top)
= ESC 1 CW
2 (top)
= ESC 2 CW
3 (top)
= ESC 3 CW
4 (bottom)
= ESC 4 CCW
5 (bottom)
= ESC 5 CCW
6 (bottom)
= ESC 6 CCW
cw
= clock wise
ccw
= counter clockwise
