- 23 -
Focus motor
Pan
Tilt
Roll
Knob settings
Electronic focus/focus motor control pane
Axes control panel
Set parameters for multifunction knob
8.3 Function operation
8.3.1 Motor power settings
Please set motor power first after powering on gimbal for the first time or after
changing a new camera/lens.
Auto tune:
Gimbal auto tune the motor power according to the load.
Adjust motor power manually:
Adjust the motor power for each axis manually
according to the load.
Tips: If the gimbal is vibrating in high frequency, it means the motor power is too
strong. If the gimbal is shaking in low frequency and large amplitude, it means the
motor power is too weak.
Motor power
PTF
Follow speed
Scenario
Auto tune
Pan axis
Tilt axis
Roll axis
Auto tune the motor
power
(Recommend)
Adjust motor power
for each axis manually