G3Ultra 3-Axis Handheld Gimbal SETTING Manual
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
- 4 -
6. Operation of attitude calibration.
(1) After connect success and read out the current parameters completely, turn on
the power switch to power supply the gimbal.
(2) Pick up the gimbal, click on Start button, wait for the motors enter the
working state. Use a gradienter as a reference, if the camera has a small angle with the
horizon in pitch or roll angles, please calibrate it to level by clicking on the + or -
button.
(Camera lens toward the front ,click on +
of ”Roll” if the camera is left tilt ,otherwise
click on - ; Click on +
of “Pitch” if the camera is adown, otherwise click on - .
(3) After completely calibration, click on Save button in this column, the software
will prompt “Save parameters success!” in the information bar.
The Save
button in the “Attitude Correction” column only effective
for saving the roll and pitch parameter.
