Fixed block
2
User Guide
1
Install the Camera
Hero5
Hero4
Remove fixed block,install the camera on retainer plate,
then fix the camera with retainer bar and screws.
Loosen the knob ring and adjust
the arm length to fit the different
cameras.
Knob ring
Cross
arm
Attention!
(1) Please install the camera before powering
on the gimbal.
(2 )When not in use, turn off the gimbal and then
remove the camera.
!
2
Power on / off
Power On:
Press and hold function button
until the green light is on.
Power Off:
Press and hold function button
until the red light changes from quick
flashing to always on.
Attention: Make sure the camera is secure
before powering on the gimbal.
In case of low battery, the red LED
indicator flashes for three times for
every 5 seconds.Please charge WG2.
!
Reference
point
Session
Summary of Contents for FY WG2
Page 14: ......
