
M200 Introduction
版权所有©飞天诚信科技股份有限公司
公司网址: www.FTsafe.com
printed on the top of the device.
• To read a contactless card it must be positioned in close proximity to the device over the contactless
symbol.
• Follow the instructions provided by your bank or service provider to complete the transaction.
Troubleshooting
In the unlikely event you experience issues with this product, please follow the guidelines below. If this
does not resolve the issue, please contact your solution provider for further assistance.
No display
• Ensure the power adapter being used is powered.
Cannot read Cards
• Ensure the magnetic stripe card has been swiped in the correct orientation.
• Ensure the chip card has been inserted in the correct orientation.
• Ensure the contactless card has been placed at a distance of 0 to 4 cm from the device.
• Test with another card of the same type.
Caution and Safety Instructions
• Do not attempt to disassemble, modify, service or repair any part.
• Do not use if damaged or with signs of tampering.
• Only use the device with supplied or manufacturer-certified accessories.
• To avoid the potential hazard of electrical shock do not use in wet environments or during an electrical
storm.
• Do not use in proximity of potentially flammable gases or substances.
• Ensure cables used do not cause a trip hazard or risk the device being dropped on to a hard surface.
• Do not expose to excessive heat or cold. Only operate between -20 °C and 70 °C.
• Before cleaning, disconnect from the electrical outlet. Use only a dry or dampened soft cloth.