Assembly
KK
4
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Loosen the Tripod Locking Knob (KK) and move the three legs out
and down, then tighten the Tripod Locking Knob (KK) (See Fig. 1).
1
Use the included Hex Wrench (HH) to remove the Hex Screws (JJ)
from the Lamp Mounting Bar (CC). Place the Carrying Handle (GG)
on the Lamp Mounting Bar (CC) and align it with the screw hole.
Place the Hex Screws (JJ) back and tighten them to hold the handle
in place (see Fig. 2).
2
Fig. 1
Fig. 2
JJ
GG
CC
3
Place the Lamp Mounting Bar (CC) onto the Tripod (BB) and
secure it into place with the bracket lock (see Fig. 3).
4
Fig. 3
Bracket
Lock
Fig. 4
AA
DD
CC
EE
FF
Attach the LED Work light body (AA) to the lamp mounting bar
(CC) by first inserting the Split Lock washer (EE) and Washer
(FF) onto the Locking Knob (DD) and screwing the Locking Knob
(DD) through (AA) and into lamp mounting bar (CC) (see Fig. 4).
Tighten the Locking knob (DD) to set into place.
NOTE:
The Locking Knobs (DD) must be loosened
first when placing the LED Work Light Body (AA)
on the Lamp Mounting Bar (CC). Re-tighten the
same Locking Knob (DD) to hold it into position
and repeat for the other side of the LED Work
Light Body (AA).
