NOTE:
Indicator light must be rapidly blinking
to connect. If not already blinking, press the
Pairing Button 3 times to enter pairing mode.
NOTE:
Be sure to connect to a 2.4 GHz Wi-Fi
network that covers your installation location.
4
WWW.FEIT.COM
OneSync Wi-Fi Smart Bridge Operation
Downloading and installing the Feit Electric app on your smart device
On the Smart Bridge, press the pairing button three
times until the indicator light begins to blink. The Smart
Bridge will be in pairing mode for 3 minutes.
1
Powering your OneSync Wi-Fi Smart Bridge
□
Plug the OneSync Wi-Fi Smart Bridge into any indoor receptacle or
outdoor GFCI outlet with cover.
2
Initiating smart bridge into pairing mode.
3
Tap Add Device or the + sign, then select OneSync Wi-Fi
Smart Bridge and confirm. You will be prompted to enter
your Wi-Fi network and password. On the Smart Bridge,
press the pairing button three times until the indicator
light begins to blink. The Smart Bridge will be in pairing
mode for 3 minutes.
Initiating smart bridge into pairing mode.
4
Only supports
2.4GHz Wi-Fi
Networks
Feit Electric App
The OneSync Smart Bridge has a 100ft control range and will command all paired fixtures within 100ft of the Smart Bridge.
All OneSync fixtures are equipped with a signal repeater that will repeat any commands to all other fixtures within 100ft. Placing fixtures within
100ft of at least one other fixture creates a control network and allows for unlimited control range, as long as there is a functioning OneSync
fixture within 100ft to relay the command.
Example:
You can install a OneSync fixture, then another OneSync fixture 100ft away from the first unit. Continue to install 3 more OneSync fixtures
in this way so that the last fixture is 500ft away. Using this relay technology, the Smart Bridge will control the farthest fixture that is 500ft away.
