Feit Electric SL12-6/FLAME Use And Care Manual Download Page 2

 2 

FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com

When using electrical products, basic precautions should always be followed including the following:

CAUTION: 

To reduce the risk of fire use only type S lamps,  

2 watts maximum. 
To reduce the risk of fire do not deliberately reposition 

either lampholder contact.
Risk of shock. Avoid making connections or 

disconnections when the equipment is wet. 

The lighting string is rated at 120V, 60Hz, 12 Watts.
It is provided with 6 lampholders and 2 Watt S Type lamps.

One bulb is 2W, 6 sockets per string light.
Total power is 2*6 =12w for one string.
Max wattage is 432W,  432/12 = 36 sets
You can link up to 32 sets of string lights

Flame Bulb Function:

1. The default setting is flame effect light.
2. Toggle your light switch OFF and ON within 2 seconds to switch
    between flame effect light or steady light.
3. If multiple lights are not displaying the same setting, toggle
    your light switch OFF then ON after 5 seconds, the display will 
    set back to default setting. 

Add wattage of all light strings together for a total of 432 Watts 

or less.

DO NOT EXCEED 432 WATTS

SAVE THESE INSTRUCTIONS

CONNECTING MULTIPLE SETS

USING LED BULBS INCLUDED

CONNECTING MULTIPLE SETS OF LED BULBS

When connecting multiple sets protect connection(s) from 

direct exposure to rain and water. Do not allow connection(s) to 

become wet.

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

 

Do not use these products outdoors unless marked suitable for 
outdoor use.

 

When products are used outdoor applications, connect the 
product to Ground Fault Circuit Interrupting  (GFCI) outlet. If 
one is not provided, contact a qualified electrician for proper 
installation.

 

Do not mount or place near gas or electric heaters, fireplace, 
candles, or other similar sources of heat.

 

Do not secure the wiring of the product with staples or nails, or 
place on sharp hooks or nails. Install only using the mounting 
means provided.

 

Do not let lamps rest on the supply cord or on any wires.

 

Do not hang objects from the cord, wire, or light string.

 

Do not use this product for other than its intended use.

 

Do not close doors or windows on the product or extension 
cords as this may damage the wire insulation.

 

Do not cover the product with cloth, paper or any material not 
part of the product when in use.

 

Read and follow all instructions that are on the product or 
provided with the product.

 

Use lamp (bulb) screw-base up position only.

 

Disconnect plug before relamping or servicing.

 

Interconnect no more than 432 Watts.

2 watts

2w
5w

7.5w

10w
15w

Maximum Wattage Range

Maximum Wattage

Number of String Lights

Number of String Lights

36 sets

36 sets
14 sets

9 sets
7 sets

4 sets

WARNING:

 RISK OF ELECTRIC SHOCK 

Disconnect power at the source prior to wiring, re-

lamping or servicing in any way. The light string kits 

are supplied with an attached three prong plug that will 

only fit into a three prong outlet. Do not alter the plug.

CAUTION:

 RISK OF ELECTRIC SHOCK

Do not use with extension cord near water or where 

water may accumulate. 
Keep lamps at least 16 feet (4.88m) from pools and spas. 

Keep plugs and receptacles dry. 
Do not submerse.

Summary of Contents for SL12-6/FLAME











Reviews: