FEIT ELECTRIC COMPANY | PICO RIVERA, CA | (800) 543-3348 | FAX (562) 908-6360 | www.feit.com
J-Box Mount Installation
MODEL S8PHMWM/850/DD/BZ
WARNING: TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE
INSTALLING THE FIXTURE IN ORDER TO PREVENT POSSIBLE ELECTRIC SHOCK.
1. Remove fixture from mounting bracket by
unscrewing the 2 side screws on the fixture
(Fig. A).
2. Make sure power is off. Feed power
supply wires through center mounting
bracket's hole. Install mounting bracket
onto the J-box (Fig B).
3. Connect the power supply wires to the
fixture, ground to green, neutral to white
and hot to black. Feed wires into the
J-box (Fig C).
4. Mount fixture and screws onto the
mounting bracket. Hand tighten the
screws with a screw driver. Caulk
between the fixture and the wall surface
with silicone sealant (not included). (Fig D).
Fig A.
screws
Fig D.
J-box
Mounting
bracket
Fig B.
Fig C.
