WWW.FEIT.COM
6
Downloading and installing the Feit Electric app
□
Search for the Feit Electric app in the App Store or Google Play Store.
□
Download and Install the Feit Electric app on your smart device.
□
Connect to a 2.4GHz Wi-Fi network that covers your installation location.
□
Follow the instructions in the Feit Electric app & Smart Bridge manual
to pair your OneSync lights.
1
Set up with Smart Bridge
Troubleshooting
Only supports
2.4GHz Wi-Fi
Networks
Feit Electric App
The battery is not fully charged.
The panel is near an external light
source that is inadvertently
triggering the dusk to dawn sensor.
The lights go out too early. The battery charge is low.
Ensure the solar panel is positioned in a
location that provides full and direct
sunlight. If installed in a shady area, the
battery will take a longer time to charge,
and may not fully charge, and reduce
working hours.
Allow the batteries to get a full charge by
powering off the fixture for 1-2 days. Or
relocate the fixture to an area with direct
sunlight. Check panel for dirt, damage, or
light obstruction.
Relocate the panel to an area that does not
have any external light sources or remove
the external light sources from the panel’s
proximity.
PROBLEM
POSSIBLE CAUSES
CORRECTIVE ACTION
The light will not turn on.
The battery is not making contact.
Loosen the battery cover screws, pull out
the battery cover and inspect the battery
connection. After inspection, reinsert the
battery.
