4
WWW.FEIT.COM
Backplate Screw Installation
Installing the backplate
□
Position the backplate (EE) in the desired location. Utilize
the holes on the backplate (EE) to mark the location for
the wall anchors (FF).
1
Peeling off the protective film
□
Peel off the protective film from one side of the
double-sided adhesive (HH).
1
Attaching the double-sided tape
□
Attach the double-sided adhesive (HH) to the backplate
(EE). Peel off the other side of the double-sided
adhesive (HH).
2
Drilling the holes
□
Use a power drill to pierce two holes in the marked
locations and insert the wall anchors (FF).
2
Attaching the backplate
□
Align the backplate (EE) holes with the wall anchors (FF) and insert the screws (GG) using a Phillips screwdriver.
3
Pressing the backplate onto the surface
□
Position the backplate (EE) to the desired area. Press the backplate (EE) onto the surface and hold for 30 seconds to assure the
backplate (EE) is held securely.
3
EE
FF
Backplate Adhesive Installation
EE
GG
FF
FF
HH
EE
EE
THIS SIDE UP
THIS SIDE UP
HH
HH
Wipe down surface before installation.
For best results only install on smooth, clean surfaces.
