© FEISOL INC, USA
WWW.FEISOL.NET
Page 2 of 4
Page 1: ...maximum hold it is recommended that you tighten both knobs left and right Warning When unlocking the panning base lock turning the knob past the point of resistance may result in damage to the locking mechanism Locking the knob tightly will cause no such damage 3 Lens Support Adjustment Knob For locking and unlocking the vertical position of the lens support base It is used to move the lens suppor...
Page 2: ... FEISOL INC USA WWW FEISOL NET Page 2 of 4 ...
Page 3: ...ease plates are ideal companions to the UA 180 Mount They offer an additional support link between the camera lens and the lens support system of the UA 180 Tighten the locking screws as shown in the picture Do not tighten one screw after another but take turns tightening all screws partly little by little applying equal force ...
Page 4: ...ck release plate combination on the UA 180 To mount camera lens QRP please slide the quick release plate into the track of the clamp at an angle starting at the top After the quick release plate has settled in the clamp release the safety pin To remove the camera lens QRP press the safety pin and quickly take out the release plate at an angle ...
