Handlebar switches
1. Engine stop switch (Red)
2. Start switch
3. Lights switch (Black) (option)
Engine stop switch
The engine stop switch controls the ignition
and can be used at all times to stop the engine,
especially in an emergency. The engine will not
start or run when the engine stop switch is
turned to “ ”. When starting the engine, the
function button should be at “ ” position.
Start switch
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See starting instructions prior to starting engine.
Lights switch
Turn the switch on for front light and taillight
(option accessory).
CAUTION:
Do not use the headlight with the engine turned
off for more than 10 minutes. The battery may
discharge to the point that the starter motor will
not operate properly. If this should happen,
remove the battery and recharge it, replace if
necessary.
4-2
