NLG00800
Dual USB charger 18W
Intended use
The USB-C charger is used to charge batteries in mobile end devices that can
be connected to the USB-A or USB-C socket via a charging cable, e.g. mobile
phones or tablet computers.
Safety instructions:
• Check the unit for external damage before each use. Do not operate it if
it is damaged.
• Children under 8 years of age and persons with reduced physical, mental or
sensory capabilities should only use the device under supervision.
• Only use USB charging cables that are suitable for high charging currents of
3A. Unsuitable charging cables may burn out or cause malfunction.
• Do not expose the unit to heat or direct sunlight. The unit and connected
devices may heat up during charging. Do not cover either.
• Do not operate the unit near naked flames.
• Do not use the charger in high humidity (e.g. in the bathroom) or where
there is a lot of dust.
• Do not use the unit immediately after it has been transported from a
cold environment to a warm one. Moisture may have formed inside due
to condensation.
• Do not open the unit; there are no components inside that require
maintenance.
• Do not continue to operate the unit if it malfunctions or smells. Unplug it
immediately and contact the seller or FeinTech.
Think about protecting the environment. Used electrical and
electronic equipment must not be disposed of with household
waste. The appliance contains valuable raw materials that can
be reused. Therefore, hand in the appliance for disposal at an
appropriate collection point.
The product complies with the legal requirements, in par-
ticular the Electrical and Electronic Equipment Act, the REACH
Regulation EC 1907/2006, and the EU Directives 2014/35/EC
LVD and 2014/30/EC EMC.
A formal CE declaration is available for download at https://feintech.eu/ce
Information according to REGULATION (EU) 2019/1782
Spreewald Kommunikationstechnik GmbH
HR B 1107 Cottbus
Radensdorfer Hauptstr. 45 a, 15907 Lübben, Germany
Model identifier
KYTW18W08AC
Input voltage
100–240 V
Input AC frequency
50/60 Hz
Output voltage
5 V DC
12V DC
Output current
3 A
1,5 A
Output power
15 W
18 W
Average efficiency in operation
85,27 %
86,65%
Power consumption at no load
0,09 W
0,09 W
Technical data:
Input:
100–240V ~ 50/60 Hz 0,5 A
Output USB-A:
DC 5V 3A | 9V 2A | 12V 1,5A
Output USB-C:
DC 5V 3A | 9V 2A | 12V 1,5A
Outputs USB-A +USB-C: DC 5V 3A
FeinTech is a registered Trademark of Spreewald Kommunikationstechnik
GmbH, Radensdorfer Hauptstr. 45 a, 15907 Lübben (Spreewald), Germany
www.feintech.eu • +49 3546 239 8855 • [email protected]
