SETUP (temp. / timer)
1. Plug it into the outlet. The “
” icon and working lamp will be on and
it will enter the standby mode.Press the “
” icon to enter the setting
mode. You will hear a sound of beep for every pressing.
2. Temperature setting. press the + or – adjust button to set the
temperature.
3. Time setting. Press the “ ” icon to set the time. You can find the timer
blinks.
First press the + or – adjust button to set hour, then press “ ” again to set
the minute.
The timer will countdown when it meets the setting temperature.
4. Press the “
” icon to confirm the setting and the unit will work. If
you want to change the setting, press and hold the“ ” icon for 3 seconds,
and then repeat the setting as above.
The unit will stop automatically when it runs out of time and an “END”
icon will show on the screen.
5. Press and hold the “
” icon for 3 seconds to stop.
Indicator light
Standby:
in red
Heating mode:
illuminate in blue
After temperature reach:
flashing in blue.
Timer:
only started counting down after temperature reached.
6
