WSG 11 R/RT; WSG 15 PR/PRT; WSG 15-70InoxR/RT; WSG 17 PR/PRT; WSG 17-70InoxR/RT
3. Notes and requirements
C-SC_CSSM
Version 1.0
2015-07-20
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
6
of
55
Please note
These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and
electrical training.
Only use original FEIN spare parts.
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in
serious risks to the user.
The provisions set out in
DIN VDE 0701-0702
should be observed after repairs.
The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when
commissioning.
The German Equipment and Product Safety Act [ProdSG] applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed.
