Grinding
34130529060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0
10.03.2021
Page
46
of
73
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.2 Assembling the gearbox housing WSG 20/25-180/230
9.2.1 Positioning the housing components
Tools:
-
Sleeve, 18 mm outer diameter
-
Plastic hammer
-
Punch, 8 mm diameter
1.
Position the needle sleeve (
1
).
2.
Position the bushing (
2
).
3.
Apply oil to the bushing (
2
).
I
NFORMATION
Pre-heat the housing.
Align the letter on the needle sleeve (
1
) with the visible side.
4.
Position the bushing (
3
).
5.
Position the sealing ring (
4
).
6.
Grease the bolt (
5
).
7.
Position the bolt (
5
).
8.
Position the spring (
6
).
9.
Position the pushbutton (
7
).
I
NFORMATION
Ensure that it is in the correct position.
Align the pushbutton (
7
) with the guide plate (
8
).
7
6
3
5
4
1
2
8
