WBP10
7. Fitting
C-SC_CSSM
Version 1.0
2015-05-22
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
27
of
39
Fitting the gearbox housing
1. Push the shaft (1) into the gearbox housing.
Take care not to damage the needle bearing in the gearbox housing when pushing the shaft in.
2. Insert the disc (2).
3. Insert the disc (3).
4. Fit the circlip (4).
5. When refitting the gearbox housing, always use a new circlip.
Tools:
- Arbor press
- Sleeve Inner dia. 13 mm
Outer dia. 25 mm
- Circlip pliers
4
3
2
1
