8
en
Inserting a paper-dust bag (Figure 4).
Use the paper-dust bag in conjunction
with the filter cartridge only for dry vac-
uuming.
When inserting a paper-dust bag, take care
that the cardboard flange and the paper-dust
bag face completely against the inside wall of
the container.
➤
Open the fasteners on both sides and
take off the vacuum cleaner lid.
➤
Grasp the new paper-dust bag by the
cardboard flange, first at the bottom then
at the top, and slide it over the cog.
➤
Mount the vacuum cleaner lid again
and close the fasteners.
The paper-dust bag is removed in reverse
order.
After removing the paper-dust bag, seal it
with the closing cover in order to avoid
debris.
Changing the filter cartridge (Figure 5).
Use the filter cartridge with or without
additional paper-dust bag only for dry
vacuuming!
Keep the filter cartridge dry and clean it regu-
larly.
Replace the filter cartridge when the vacuum
performance decreases.
➤
Open the fasteners on both sides and
take off the vacuum cleaner lid.
➤
Screw the nut at the bottom side of
the filter cartridge counterclockwise and
remove the filter cartridge.
➤
Mount the new filter cartridge cen-
tered and screw the nut clockwise to the
stop.
➤
Mount the vacuum cleaner lid again
and close the fasteners.
Fig. 4
Paper-
dust bag
1.
2.
Fig. 5
Filter cartridge
Nut
3 41 01 116 06 0.book Seite 8 Freitag, 17. Dezember 2010 12:42 12
