Metal core drilling
Fitting
C-SC_CSSM
Version 1.0
11.02.2019
Page
66
of
88
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.2.7 Fitting the gearbox housing
Steps that must be completed:
-
Fitting the drill motor electronics
-
Fitting the stator
-
Fitting the connecting piece
-
Fitting the housing
-
Fitting the intermediate gearbox
Tools:
-
Torx T20
1.
Place the gearbox housing (
1
) on the drill motor.
2.
Screw in the four screws (
2
).
2
1