KBB 38 X
7. Fitting
C-SC_CSSM Version
1.0 2015-08-25
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
45
of
56
Fitting the guide
1. Position the guide (1) on the drill motor.
2. Secure the guide with the two screws [M6x30] (2) and the two screws [M6x35] (3).
PLEASE NOTE:
Raising and lowering the drill motor poses a risk of crushing at the cable.
Connecting cable must be laid in the guide rail intended for it.
3. Put the drill motor (4) on the housing.
4. Position the guide (5).
5. Install the guide with the four screws with discs (6).
Tools:
- Socket head wrench
5 mm
4
2
3
1
6
5
