11
en
Filling coolant tank (figure 4).
Prevent the flow of liquid
along the cable into the
socket outlet or into the core drill unit, as this
can lead to electric shock. Tie a bow in the
cable near the plug, so that any liquid can drip
off.
Open the coolant bottle cap of the coolant
container.
Fill with water soluble cutting fluid like Slug-
ger Cutting Fluid.
Replace the cap back onto the coolant con-
tainer.
Do not use the magnetic base drill unit if the
cooling lubricant system is defective. Check
for proper seal against leaks and for cracks in
the hoses. Prevent liquids from entering or
penetrating electrical components.
WARNING
Coolant
container
Coolant bottle cap
OBJ_BUCH-0000000058-002.book Page 11 Thursday, October 4, 2012 4:11 PM
