GSZ 8-280P; GSZ 8-280PE; GSZ 8-280PL; GSZ 8-280PEL; GSZ 8-90PEL
6. Removal
C-SC_CSSM
Version 1.0
2015-12-09
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
12
of
53
Removing the switch
1. Remove the insulating hose (1).
2. Pull the stranded wire of the contact spring off the stranded wire of the electronics (2).
3. Open the cover (3).
4. Insert a small slotted screwdriver into the spring terminals and turn.
5. Remove the four cables (4).
6. Lift up the tension spring (5) from the carbon brush (6) [on both sides].
7. Pull out the carbon brush (6) [on both sides].
Tools:
- Slotted screwdriver
(small)
- Assembly aid
4
3
2
1
5
6
