GHB 15-50; GHB 15-50 Inox; GHB 15-50 (A); GHB 15-50 Inox (A)
7. Fitting
C-SC_CSSM
Version 1.0
2016-06-03
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
24
of
40
Fitting the contact wheel
1. Position the holder (1) on the contact wheel.
2. Screw in the screw (2).
3. Position the plate (3) and secure it with the screw (4).
4. Position the holder (5).
5. Coat the two screws (6) with thread-locking fluid.
6. Screw in the two screws (6).
7. Screw in the screw (7) with nut.
The screw with nut will be adjusted at the end of the fitting procedure, see operating instructions.
Tools:
- Socket head wrenches
3 mm; 5 mm
- Open-ended spanner
10 mm
1
2
6
5
4
3
7
