Dustex 25L; 35L
7. Assembly
C-SC_CSSM
Version 1.0
2015-02-27
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
21
of
35
Assembling base plate (applies to: Turbo I; Turbo II)
1. Thread cable with plug into opening (1).
2. Position cable clamping piece (2) and screw down.
3. Wind cable from motor through ferrite sleeve (3) twice.
4. Wind cable of sensor through ferrite sleeve (4) three times.
5. Wind cable of sensor through ferrite sleeve (5) twice.
Tools:
- Torx T15
(length: 89 mm)
2
1
3
4
5