BOS 16; BOS 16-2
6. Disassembly
C-SC_CSSM
Version 1.0
13.11.2013
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
19
of
55
Disassembling gearbox housing (only applies to BOS 16)
1. Remove circlip (1).
2. Remove clutch (2).
3. Take all gear-wheels out of gearbox housing.
4. Remove the two grooved ball bearings (3).
5. Remove circlip (4).
6. Press shaft (5) with grooved ball bearing out of gearbox housing.
Tools:
- Circlip pliers
- Inner puller
- Slide hammer
- Arbor press
- Sleeve
38 mm inner diameter
43 mm outer diameter
1
4
5
3
2