Fein ASCT18, Instructions Manual

Page: 16 / 133

16
en
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Oth-
erwise there may be danger of injury caused by unintentional starting of the power
tool.
Use eye protection during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against contin-
uous intense sunlight.
Observe the information in the adjacent text!
Gripping surface
Switching on
Switching off
Confirms the conformity of the power tool with the directives of the European Com-
munity.
This sign indicates a possible dangerous situation that could cause severe or fatal
injury.
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Low speed
High speed
Reduce torque
Increase torque
(**) may contain numbers and letters
Character Unit of measurement,
international Unit of measure-
ment, national Explanation
U
V V DC voltage
n
0
/min, min
-1
, rpm, r/min rpm No-load speed
n
1
/min, min
-1
, rpm, r/min rpm Speed, full load
M... Nm Nm Torque (hard/soft screwdriving application)
WARNING
OBJ_BUCH-0000000374-001.book Page 16 Friday, January 24, 2020 9:46 AM