ASCM 14; ASCM 14QX; ASCM 18; ASCM 18QX; ASCM 18QM
7. Assembly
C-SC_CSSM
Version 1.0
08.06.2017
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
22
of
40
Assembling quick-clamping drill chuck (applies to: ASCM 14, ASCM 18)
1. Clamp shaft (1) in vice by square.
2. Screw chuck (2) on to shaft.
Tighten to tightening torque of 33 ± 3 Nm.
Tools:
- Socket wrench insert
19 mm
- Torque wrench
1
2
