Fein ASCD18W2 Instruction Manual Download

Page: 6 / 52

Handling hazardous dusts.

When working with power
tools, such as when grinding,

sanding, polishing, sawing or for other work
procedures where material is removed, dusts
develop that are both hazardous to one’s
health and can spontaneously combust or be
explosive.

Contact with or inhaling some dust types can
trigger allergic reactions to the operator or
bystanders and/or lead to respiratory infec-
tions, cancer, birth defects or other reproduc-
tive harm.

Examples of such materials which contain
chemicals that can produce hazardous dusts,
are:

–

Asbestos and materials containing asbestos

–

Lead-containing coatings, some wood
types such as beech and oak

–

Minerals and metal

–

Silicate particles from bricks, concrete and
other materials containing stone

–

Solvent from solvent-containing paint/var-
nish

–

Arsenic, chromium and other wood pre-
servatives;

–

Materials for pesticide treatment on boat
and ship hulls

–

Stainless steel dust, metal dust and non-
ferrous metal dust

To minimize the unwanted intake of these
materials:

–

Use dust extraction matched appropriately
for the developing dust.

–

Use personal protective equipment, such
as a P2 filter-class dust protection mask.

–

Provide for good ventilation of the work-
place.

The risk from inhaling dusts depends on how
often these materials are worked. Materials
containing asbestos may only be worked by
specialists.

Wood and light-metal dust can
cause spontaneous combus-
tion or explosions.

Hot mixtures of sanding dust and paint/var-
nish remainders or other chemical materials
in the filter bag or the vac filter can self-ignite
under unfavorable conditions, such as spark-
ing from sanding metal, continuous sunlight
or high ambient temperatures. To prevent
this:

–

Avoid overheating the material being
sanded and the power tool.

–

Empty the dust collector/container in time.

–

Observe the material manufacturer’s
working instructions.

–

Observe the relevant regulations in your
country for the materials being worked.

Hand/arm vibrations.

While working with this power
tool, hand/arm vibrations
occur.

These can lead to health

impairments.
The vibration emission value
during actual use of the power

tool can differ from the declared value
depending on the ways in which the tool is
used.

It is necessary to identify safety
measures to protect the oper-

ator that are based on an estimation of expo-
sure in the actual conditions of use.

The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one
tool with another. It may be used for a pre-
liminary assessment of exposure.
The declared vibration emission level repre-
sents the main applications of the tool. How-
ever if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission
may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to
vibration should also take into account the
times when the tool is switched off or when
it is running but not actually doing the job.
This may significantly reduce the exposure