Screwing
34130560060
Printed in Germany
Assembly
C-SC_CSSM
Version 1.0
19.05.2021
Page
21
of
24
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.3 Assembling the motor housing
Steps that must be completed:
-
Fitting the gearbox
-
Assembling the electronics
Tools:
-
Torx T15
-
Socket head wrench, 4 mm
1.
Position all components in the motor housing.
I
NFORMATION
Ensure that the motor housing (
1
) is in the correct position.
Ensure that the motor (
2
) is in the correct position.
Applies to model: 7 115 08 .. .. . ASCD 18-1000 W34
2.
Correctly position the speed setting switch (
3
).
I
NFORMATION
The motor housings for the respective models are not
compatible with each other.
•
The speed setting switch is glued to the circuit board.
•
There is a damper in the motor housing.
Applies to model: 7 115 09 .. .. . ASCD 18-1000 W34
3.
Correctly position the speed setting switch (
3
).
I
NFORMATION
The motor housings for the respective models are not
compatible with each other.
•
The speed setting switch is screwed to the circuit
board.
•
The motor housing has an expandable recess for the
speed setting switch
1
2
3
3