AFSC 1.7Q; AFSC 18QSL
7. Fitting
C-SC_CSSM
Version 1.0
2017-05-08
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
23
of
33
Fitting the tool head
1. Fill the tool head with grease.
Make sure that the inside of the yoke is well-greased.
2. Position the needle bearing (1).
3. Align the yoke (2) and the needle bearing so that they are central.
4. Position the rotor and check it works correctly.
5. Press in the rotor (3).
Tools:
- Arbor press
- Press-in fixture
1
3
2
