13
en
Bluetooth
®
Connection
By coupling the charger with a
Bluetooth
®
low-energy
capable mobile device, data can be transferred between
the charger and the mobile device. For this, download
the FEIN Service App onto your mobile device and fol-
low the instructions of the FEIN Service App.
The FEIN Service App enables:
–
the registration of FEIN power tools
–
the management of FEIN power tools
–
the status check of charger and battery
–
access to further information.
The QR Code for the FEIN Service App is available
below:
Continuous red light
Charging not possible due to the following possible reasons:
–
Contacts contaminated. Improvement measure: Clean the contacts by inserting
and removing the battery several times.
–
The battery is defective. Improvement measure: Replace the battery!
Charging procedure
Continuous green light
flashing LED
Rapid charging starts.
The rapid charging is active.
Charge condition of battery ≤ 25%
The rapid charging is active.
Charge condition of battery ≤ 50%
The rapid charging is active.
Charge condition of battery ≤ 75%
Rapid charging is over.
Charge condition of battery ≥ 75%
LED continuously OFF while battery is attached on charger:
Rapid charging is over.
Battery fully charged for more than 1 hour on the charger.
The charge indication of charger and battery may temporarily vary for technical reasons.
LED indicator
Meaning
iOS > V5.0
Android > V6.0
Summary of Contents for 9 26 04 180 01 0
Page 3: ...3 1 2...
