Repair instructions
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2012.07
13/40
NOTE
The compensating discs in front of and behind the ball bearings must be replaced in
the same position on assembly. The discs are used to adjust the play between the
slide switch and the switch ring on the clutch.
1. Remove the flange and take the disc(s) out of the flange.
2. Remove circlip.
NOTE
Always use a new circlip for reassembly.
3. Remove the ball bearings.
4. Remove discs.
5. Remove circlip.
6. Disassembly
Tool:
- Circlip pliers
