Fein 7 205 47, Manual

Page: 14 / 129

14
en
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Observe the information in the adjacent text!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Gripping surface
No grease and oil on inside of tensioning strap!
Position tensioning strap correctly!
Tighten handle firmly!
Switching on
Switching off
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
1st gear/2nd gear
Low speed
High speed
Character Unit of measurement,
international Unit of measurement,
national Explanation
P
1
W W Power input
P
2
W W Output
U
V V Rated voltage
f
Hz Hz Frequency
n
0
/min, min
-1
, rpm, r/min rpm No-load speed
MAX
WARNING
OBJ_BUCH-0000000128-003.book Page 14 Friday, July 27, 2018 1:49 PM