12
DSP & Processing
DSP Resolution:
54bit accumulation registers, 96 bit precision on
intermediate processing data
Delay:
up to 900.998ms for each input
Input Filter Gain:
From -12dBu up to +12dBu; by 0.5dBu resolution
steps
Center Frequency:
Selectable with a 1Hz resolution step from 20Hz up to
20kHz
Crossover section
HPF/LPF: Butterworth 6/12/18/24/48dB per octave;
Linkwitz-Riley 12/24/36/48dB per octave; Bessel
12/24dB per octave. Filter resolution 1Hz
13 Audio
Analog Input:
1 x XLR electronically balanced, +12dB
AD & DA Converters:
24bit
14 Troubleshooting
If, in contrary to expectations, the speakers do not play any sound, first check that
the power switch is set to ON and the power indicator LED is lit. If the LED does not
light up, check whether the power voltage is present at the socket, the power cable is
OK and correctly plugged into the socket. If all this is correct, continue to check the
audio chain from the player to the active module including the signal cable step by
step. If possible, test the individual components independently for faultless
functioning.
15 Ground loops
Ground loops are caused by faulty routing of the power lines in the house.
Occasionally the antenna cables on the tuner or receiver are the cause. Hifi
equipment that is incorrectly or not grounded can also cause a humming noise.
Connecting all devices to a common power outlet may eliminate the problem.
16 Warranty
Fein Audio manufactures its loudspeakers in Germany from high-quality components.
Each active loudspeaker is carefully checked and subjected to a 48-hour endurance
test. It always leaves our manufacturing facility in tested condition. In the vast
majority of cases, trouble-free operation of the speakers can be expected for many
years. If you have any complaints, please contact your Fein Audio dealer. He will
grant you a warranty of three years on new equipment and provide service.
Summary of Contents for V3
Page 1: ...Operation Manual Fein Audio V3 Loudspeaker...
Page 5: ...Picture 1...
Page 8: ...Picture 2...
