Installation Manual ID AT-A
FEIG ELECTRONIC GmbH
Page 21 of 28
E N G L I S H
4. Variations of connecting the ID AT-A to different types of antennas.
According to the use of each antenna type, the way of connection varies.
4.1 Connecting a single frame antenna (ID ANTRW.8060R-A)
With the frame antenna, the antenna tuner is integrated to the antenna frame, only the connection
to the ID RW24.ABC-A has to be completed. (see Fig. 2). The ribbon cable antenna integrated to
the frame is being connected to the ID AT-A via the adapter ID ANT.AP-B. The connection of ID
ANT.AP-B to ID AT-A is effected here by means of an additional terminal which is fixed to the lid of the
casing of the ID AT-A (only with ID ANTRW.8060R-A).
X7
4
3
2
1
L
N
PE
5
4
3
2
1
Sig+
Sig-
U+
GND
PAA
ID RW24.ABC-A
X1
U+
GND
+Sig
-Sig
X1
Screen don’t connect
ID AT-A
ANT
ANT
X2
X3 X4
X5 X4
X1
X2
ID ANT.AP-B
(1)
Pin 1
Pin 26
Antenna housing
-------
7HUPLQDO
PD[P
Fig. 2 Connection of the frame antenna
4.2 Connection of two frame antennas in gate-arrangement
Employing an ID ANTRW.8060R-A and an ID ANTRW.8060R-B, a gate-antenna may be created.
The connection is executed, like with the single frame antenna, via the terminal in the lid of the
casing of the ID AT-A. The assignement of the terminal is different, as both antennas have to be
connected in series. (see Fig. 3).
