OBID
i-scan
®
UHF
Installation
ID ISC.PRHD102
FEIG ELECTRONIC GmbH
Page 13 of 23
M80601-4e-ID-B.docx
4.1.3. Charging the batteries
DC-Plug
Reset -
button
Minus (outside)
Plus (inside)
Figure 4 + Figure 5: ID ISC.PRHD102-B: Reset button and DC/
plug 2.1mm*5.5mm
The rechargeable batteries may remain in the Reader for charging. You will need an external
charger connected to the DC/
jack.
Table 5: Charger connection
DC jack
Abbreviation
Description
Inside
+
Plus – charge voltage
Outside
-
Minus – charge voltage
NOTE:
Reversing the polarity of the charger can destroy the batteries.
The Reader is not functional while the batteries are charging.
Charger :
Use a charger suitable for the battery type specified (4-cell pack).
Table 6:Recommended charger
Feig Article No.
Name
2650.000.00
ID CHA.NiMH-A
The recommended charger is designed for nickel/cadmium (NiCd) type rechargeable batteries and
nickel/metal hydride (NiMH) with a capacity range of 800mAh to 7200 mAh.
Alternately the batteries can be removed from the Reader and charged in a separate battery
charger.
