OBID
i-scan
®
UHF
Installation
ID ISC.PRHD102
FEIG ELECTRONIC GmbH
Page 12 of 23
M80601-4e-ID-B.docx
4.1.2. Supply voltage
The Reader is powered by rechargeable batteries. Four AA type rechargeable batteries are used.
These are inserted into the handle of the Reader. To change the batteries, remove the battery
cover. After unlatching the springs the cover can be removed. The rechargeable batteries are
placed in the compartment according to the + and – symbols indicated (note polarity). Then
replace the cover and listen for the spring to audibly latch.
Table 4: Designations for rechargeable Mignon-type batteries
General type
Europe
USA
Size (D*l)
Mignon
R6 / UM-3
AA
15mm * 51mm
NOTE:
Use only Nickel/Cadmium (NiCd) or Nickel/Metal Hydride (NiMH) batteries.
Do not use single-use batteries (e.g. zinc-carbon / alkaline) batteries.
Reversed polarity may destroy the device.
Rechargeable batteries should never be discarded with normal trash; please return them to
a proper collection location !
Figure 3: Inserting the rechargeable batteries
