OBID
i
-scan
Montage
ID ISC.PRH100-A/-USB
FEIG ELECTRONIC GmbH
Seite 9 von 29
M10501-3de-ID-B.doc
D E U T
S C H
2.1.3. Versorgungsspannung
Die geregelte Versorgungsspannung von 5 V DC ist an der DC-Kupplung anzuschließen.
Der Reader muß mit einer Stromquelle begrenzter Leistung´ versorgt werden. Diese darf maximal
einen Ausgangsstrom von 8 Ampere liefern.
DC-Kupplung
Kurzzeichen
Beschreibung
Innen
+5V
+ 5 V DC – Versorgungsspannung
Außen
GND
Ground – Versorgungsspannung
Tabelle 2-2: Anschluss der Versorgungsspannung
Hinweis:
Eine Verpolung der Versorgungsspannung kann zur Zerstörung des Gerätes führen.
Abbildung 2-3: Belegung der DC-Kupplung 2,5mm*5,5mm
Netzteilempfehlungen :
Zur Ausnutzung der vollständigen Leistungsfähigkeit des Reader-Moduls sollte auf eine stabili-
sierte und rauschfreie Spannungsversorgung geachtet werden. Bevorzugt wird ein geregeltes
Netzteil mit 5V DC / 1300 mA. Bei der Verwendung eines Schaltnetzteils ist darauf zu achten, daß
die interne Schaltfrequenz des Netzteils unterhalb von 300 kHz liegt.
(Siehe: 6.1 Zubehör und 7.1.1 Netzteil ID NET.5VDC).
Feig Artikel Nr.
Bezeichnung
1689.000.00
ID NET.5VDC
Tabelle 2-3: Empfohlenes Netzteil
+ 5 V DC
AGND