Feig Electronic OBID i-scan ID ISC.MRU102-POE, Installation Manual

Page: 15 / 21

OBID i-scan
®
UHF Installation ID ISC.MRU102-PoE/-USB
FEIG ELECTRONIC GmbH Page 15 of 21 M20711-0e-ID-B.docx
5. Control and Display Elements
5.1. LED
The Reader’s LED can be configured through software.
The following Table 8 shows the default setting.
Abbreviation Description
LED green
"RUN "
-
Turns on when the Reader is ready
LED red
„LABEL“
- Turns on when a transponder is detected.
- Flashes if RF-Warning (red – green alternating with 8Hz)
(Temperature alarm, short circuit on antenna output)
LED orange
„INITIALIZING“
- Flashes during Reader initialization after power-up.
Table 8: Default configuration of the LEDs