OBID i-scan
®
Installation
ID ISC.ANT800/600-DA
FEIG ELECTRONIC GmbH
Page 25 of 38
M50101-0de-ID-B.doc
E N G L I S H
8
Performance features of the ID ISC.ANT800/600-DA Antenna
The ID ISC.ANT800/600-DA antenna is a single loop antenna with tuning circuitry and has been
optimized as a sending and receiving antenna for the ID ISC.LR200 Reader. With a set
transmitting power of 4 W a read range of up to 80 cm is possible. Operation with other Readers
having a transmitting frequency of 13.56 MHz and an output impedance of 50
Ω
is likewise
possible.
The antenna consists of the electrical antenna conductor, housing and the tuning circuitry
ID.ISC.DAT (Tuner).
The antenna was factory tuned on a wood base to an impedance of 50
Ω
. After installing in other
ambient conditions, the antenna can be tuned using the corresponding commands (see Manual
Communication FU, H30701-xe-ID-B).
The antenna can be used for detecting either goods or persons. It is suitable for indoor or outdoor
installation.
The preferred orientation of a Smart Label is parallel to the antenna area. The maximum range is
achieved over the center of the antenna area.
Summary of Contents for OBID i-scan ID ISC.ANT800/600-DA
Page 21: ......
