Feig Electronic OBID i-scan ID ISC.ANT.MUX, Manual

Page: 13 / 27

OBID i-scan
®
Manual Communication FU
FEIG ELECTRONIC GmbH Page 13 of 27 H30701-3e-ID-B
2.2.2. [0xDE]: CPU-Reset
This protocol is used to perform a CPU reset on the multiplexer.
Host
→
MUX
CMD Data
[0xDE]
MUX-Adr
1
0x02 8 bits 0xFE 8 bits
Host
←
MUX
Data
STATUS
2
0x00 8 bits
2.2.3. [0xDD]: Select Channel
This protocol is used to set the output channel OUT1-8 on the multiplexer.
Host
→
MUX
CMD Data
[0xDD]
MUX-Adr
3
OutCh1 OutCh2
0x02 8 bits 0xFE 8 bits 8 bits 8 bits
Host
←
MUX
Data
STATUS
4
0x00 8 bits
OutCh1:
Output Channel for IN1: 0x00 to 0x08
OutCh2:
Output Channel for IN2: 0x00 to 0x08
Settings for the individual channels greater than 0x08 or the same setting for both channels are
rejected and acknowledged with STATUS 0x11 (Parameter Range Error).
A setting of 0x00 overwrites the current channel setting.
1
see 2.1.4. Multiplexer Address Setting
2
see APPENDIX A: Index STATUS
3
see 2.1.4. Multiplexer Address Setting
4
see APPENDIX A: Index STATUS