OBID
i-scan
®
HF
Installation
LRM2500
FEIG ELECTRONIC GmbH
Seite 29 von 69
M00910-8e-ID-B-ANATEL.doc
The coax cables have fixed lengths and may not be shortened and therefore need to be tied into
small loops (see Fig. 15). Tie all cables as far away from the antenna conductor as possible. The
cables must never be allowed to contact the antenna conductor. The cable from antenna type B to
the antenna type A should preferably be connected shortly. Unused cable lengths are possible
should be tied in antenna B type.
Fig. 15:Connection of the components in an antenna Type A
Fig. 16: Unused coaxial cables are tied in antenna Type B
