manualshive.com logo in svg

Feig Electronic OBID classic-pro ID CPR.03.20-CD, Manual, Page: 8 / 40

Share
Download
Feig Electronic OBID classic-pro ID CPR.03.20-CD Manual Download Page 8

OBID

®  

classic-pro

Manual

ID CPR.03.20-CD

FEIG ELECTRONIC GmbH

Page 8 of 40

H60100-5e-ID-B.doc

2.2. 

Applicable Standards

RF approval

•

  Europe

•

  USA

EN 300 330 

FCC  47 CFR Part 15

EMC

EN 301 489

Safety

•

  Low Voltage

•

  Human Exposure

EN 60950

EN 50364

2.3. 

Approval

When properly used this radio equipment conforms to the essential requirements of Article 3 and
the other relevant provisions of the R&TTE Directive 1999/5/EC of March 99.

Equipment Classification according to ETSI EN 300 330 and ETSI EN 301 489: Class 2

FCC ID: PJMCPR03

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Unauthorized modifications may void the authority granted under Federal communica-
tions Commission Rules permitting the operation of this device.

Summary of Contents for OBID classic-pro ID CPR.03.20-CD









































Reviews:

No comments