OBID
®
classic-pro
Installation
ID CPR.02.VP/AB-x
FEIG ELECTRONIC GmbH
Page 23 of 36
M30800-1de-ID-B.doc
2. Installation
The Reader has been designed for wall installation on 60 mm flush-mounting box. For surface in-
stallation, the bottom part of the casing can be substituted by the surface frame ID APR-A, which is
available as an attachment.
NOTES:
•
The Reader must not be installed directly upon conductive materials as e.g. metal sur-
faces, metal grids (reinforcements) or metallized surfaces, as these surfaces reduce the
detection range of the Reader. The distance between the Reader and such surfaces
should be min. 3 cm.
If an installation to a metal surface becomes necessary, the surface frame ID APR-A can
be employed in order to keep the minimal distance.
•
The distance between two Readers of the same type should not fall below 20 cm.
•
Before any installation the intended position of the Reader should be tested for its suit-
ability.
•
The opening (A) in the casing (see Fig 1) has to be installed downwards!
Fig 1: mounting direction (A) downwards
