OBID i-
scan
®
Montage / Installation ID ISC.MRU102
FEIG ELECTRONIC GmbH Seite 39 von 42 M20110-1de-ID-B.doc
15.2. USA (FCC) and Canada (IC)
15.2.1 USA (FCC) and Canada (IC) warning notices
Product name:
ID ISC.MRU102-USB
ID ISC.MRU102-PoE
Reader name:
ID ISC.MRU102-USB
ID ISC.MRU102-PoE
FCC
ID
:
IC
:
PJMMRU102
6633A-MRM102
Notice for USA and
Canada
This device complies with Part 15 of the FCC Rules and with
RSS-210 of Industry Canada.
Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Unauthorized modifications may void the authority granted under Federal
communications Commission Rules permitting the operation of this
device.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Le présent appareil est conforme aux CNR d'Industrie Canada appli- cables
aux appareils radio exempts de licence. L'exploitation est auto- risée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonc-
tionnement.
Warning: Changes or modification made to this equipment not expressly approved by
FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment.
