Feider FST200PRO Instruction Manual Download Page 2

ORIGINAL INSTRUCTIONS

2

INTENDED USE

The basic version of the equipment is a scarifier intended for private use, i.e. for use in home and gardening
environments. The scarifier roller is designed for ripping moss and weeds out of the soil and for loosening
the soil. As a result your lawn can absorb nutrients better and is cleaned. We recommend you to scarify you
lawn in the spring and autumn.

Scarifier for private use machines whose annual operating time generally does not exceed 10 hours, during
which the machine is primarily used to maintain small-scale, residential lawns and home/hobby gardens.
Public facilities, sporting halls, and agricultural / forestry applications are excluded.
The operating instructions as supplied by the manufacturer must be kept and referred to in order to ensure
that the equipment is properly used and maintained. The instructions contain valuable information on
operating, maintenance and servicing conditions.

Warning!

: Due to the high risk of bodily injury to the user, the equipment may not be used to grind up

branch or hedge clippings. Moreover, the equipment may not be used as a cultivator to level out high areas
such as mole hills.
For safety reasons, the scarifier may not be used as a drive unit for other equipment or toolkits of any kind,
unless specifically advised to do so by the manufacturer.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for
equivalent purposes.

Summary of Contents for FST200PRO
























Reviews: