background image

 

WARNING: DO NOT USE ANY OTHER FUEL than that recommended in your manual. Always follow instructions in the 

Fuel and Lubrication section of this manual. Never use gasoline unless it is properly mixed with 2-cycle engine lubricant. 

Perman

ent damage to engine will result, voiding manufacturer’s warranty.

 

 

DO NOT SMOKE while refueling or operating equipment. 

 

DO NOT OPERATE UNIT WITHOUT A MUFFLER and properly installed muffler shield. 

 

DO NOT TOUCH or let your hands or body come in contact with a hot muffler or spark plug wire. 

 

DUE TO THE DANGER of exhaust fumes, never operate blower in a confined or poorly ventilated area. 

 

NEVER POINT BLOWER in the direction of people, animals, buildings, automobiles, or open windows, etc. 

 

DO NOT operate unit without inlet cover installed to prevent contact with impeller. 

 

DO NOT set a hot engine down where flammable material is present. 

 

DO NOT OPERATE UNIT FOR PROLONGED PERIODS. Rest periodically to prevent damage from vibration, damage to ears 

or damage to the appliance.   

 

Operate the machine in a recommended position and only on a firm, level surface. 

 

Do not operate the machine on a paved or gravel surface where ejected material could cause injury. 

                                                                                                                                                                                 

                  WARNING: DO NOT ADD, REMOVE OR ALTER ANY COMPONENTS OF THIS PRODUCT. Doing so could cause personal 

injury and/or damage the unit, voiding the manufacturer’s warranty.

 

 

DO NOT OPERATE UNIT WHILE TIRED, SICK OR UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. 

 

DO NOT operate your unit near or around flammable liquids or gases whether in or out of doors. An explosion and/or fire 

may result. 

 

DO  NOT  WEAR  loose  clothing,  scarfs,  neck  chains,  unconfined  long  hair,  and  the  like.  Doing  so  could  cause  injury 

associated with objects being drawn into the rotating parts. 

 

DO NOT refuel a running engine or an engine that is hot. 

 

Before  using,  always  visually  inspect  to  see  that  fasteners  are  secure,  the  housing  is  undamaged  and  that  guards  and 

screens are in place. Replace worn or damaged components in sets to preserve balance. Replace damaged or unreadable 

labels. 

 

Before starting the machine, make certain that the tube is empty. 

 

Keep your face and body away from the nozzle. 

 

Do not allow hands or any other part of the body or clothing inside the discharge chute or near any moving part. 

 

Keep  proper  balance  and  footing  at  all  times.  Do  not  overreach.  Never  stand  at  a  higher  level  than  the  base  of  the 

machine when blowing material with it. 

 

Always stand clear of the discharge zone when operating this machine. 

 

 

To reduce the risk of hearing loss associated with sound level, hearing protection is required. 

Summary of Contents for FAST175T





























Reviews: